9 steps, how to make a tablecloth organs

Posted: 26 Feb 2011 12:20 AM PST

Tablecloths offer a beautiful envelope on each table and protect it from unwanted scratches and dents. A table cloth can with the right-hand drive and the use of different materials are produced. Here are 10 steps of the process are certainly a tablecloth:

Before you begin, you must use the following materials available:

– Yard stick or tape measure

– Fabric (54 cm)

– Sewing machine / needle and thread

1. First you have to take measures on the table with the help of aMeasuring tape or meter, then put it on your notebook or on paper.

2. Get the right wine or to hang your towel and then add an inch of each dimension of the table. The drop typically ranges 8 to 10 inches.

3. A 54-inch widescreen home furnishing fabrics of cotton and polyester blend fabric is suitable for this project. They correspond to the size and 2 in a certain level, buying a birdie.

4. The fabric should be washed and pressed.

5. OnSurface of the fabric cutting board, spread evenly throughout the show from the tissue using the wrong side. The card provides a guide for you will be able to cut the fabric of the measured values.

6. You need to store the raw edge of fabric about ½ inch again, fishing the edge.

7. The hem of the tablecloth should put pins in a fixed perpendicular to the edges of fabric.

8. Sew the edge of the tablecloth with the help ofThe sewing machine. Raise the presser foot sewing machine as you reach a corner and turn the fabric in place to keep in line sewing needle must be inserted into the tissue, such as his position is.

9. If a machine is not available, you can sew the hem hand towel. Use complete a point back to the task.

Add some 'props for the production of tablecloths. It all depends on your tastes and preferences.

Presser Feet

วันเสาร์ที่ 26 กุมภาพันธ์ พ.ศ. 2554

9 steps, how to make a tablecloth organs

9 steps, how to make a tablecloth organs

ไม่มีความคิดเห็น:

แสดงความคิดเห็น